Free shipping over 200 €
Cart is empty
0,00 €
0
590/591
The DC590+ is part of Parker’s Integrator series. This high-performance DC drive meets the requirements of even the most complex DC motor applications.
Technical Specifications
Input Voltage:
- 3 × 110–220 VAC ±10 %, 50–60 Hz ±5 %
- 3 × 220–500 VAC ±10 %, 50–60 Hz ±5 %
- 3 × 500–690 VAC ±10 %, 50–60 Hz ±5 %
Output Current: 15 – 2700 A (15 – 165 A for DRV version)
Output Power: 1 – 1500 kW
Feedback Options: Voltage feedback, tachometer, encoder
Communication Interfaces: RS232 / RS485, CANopen, ControlNet, DeviceNet, Profibus, Ethernet TCP/IP, LINK Communications, Modbus
Operating Modes: Regenerative (4-quadrant) or non-regenerative (2-quadrant)
Operating Conditions
- Currents 15–165 A: 0 – 45 °C
- Currents 180–270 A: 0 – 35 °C
- Currents 380–2700 A: 0 – 40 °C
Altitude: Up to 500 m without derating (1 % reduction for every additional 200 m, up to 5000 m)
Overload Capacity:
- Currents 15–270 A: 150 % for 30 s / 200 % for 10 s
Certifications: CE, UL, cUL, Overvoltage Category III, Pollution Degree II
Inputs and Outputs
Analog Inputs: 5 (1 × 12-bit + sign, 4 × 10-bit + sign)
- 1 × Speed setting (-10 / 0 / +10 V)
- 4 × Programmable inputs
Analog Outputs: 3 (10-bit)
- 1 × Current display (-10 / 0 / +10 V or 0 – 10 V)
- 2 × Programmable outputs
Digital Inputs: 9 (24 V DC, max. 15 mA)
- 1 × Program Stop
- 1 × Coast Stop
- 1 × External Stop
- 1 × Start/Run
- 5 × Programmable inputs
Digital Outputs: 3 (24 V DC / 100 mA, short-circuit protected)
- All 3 programmable
Reference Voltages: +10 V DC / -10 V DC / +24 V DC
Catalogs
Instructions and Certificates
© 2025 - 2026 GO TO d.o.o. All rights reserved.