× Warning! product_quantity_warning

XMC-E32A Stand alone motion controller/krmilnik (Analogni I/O)

Koda:  4724000200


EtherCAT-based Motion Control System
- Servo Drive 32 axes, Remote 32 I/Os
-CAM control 100~32,768 points (Up to 32 CAM Profiles)
-Supports G-code/M-code/NC commands
-Cycle Times 0.5/1/2/4ms
(same as primary task's cycle time)
SD Card Slot -Max. 8GB
Ethernet: Auto/ 10Mbps/ 100Mbps
USB2.0, 1 channel
Loader Service (XG5000)
XGT Protocol (LS protocol), Modbus TCP
FTP Server : Able to Read/Write SD Memory Files from Other Devices
SNTP Client : Real-time Synchronization with Server
AC100V~AC240V / 50~60Hz

Tariff Number (TARIC): 85371091
Country of origin (COO): K
R

Ni na zalogi
1.364,88 €   1.665,15 € (z DDV)
XMC-E32A programmable motion controller (programabilni krmilnik gibanja) realizira avtomatizacijo proizvodne industrije s stroškovno učinkovito in enostavno ter uporabniku prijazno inženirsko rešitvijo. XMC-E32A ponuja funkcije nadzora gibanja, ki temeljijo na visoki zmogljivosti EtherCAT, skupaj z različnimi vgrajenimi funkcijami, specializiranimi za numerično krmiljenje. Poleg LSIS PLC, HMI in servo izdelkov vam bo XMC-E32A pomagal ustvariti še boljšo in bolj optimalno rešitev.

EtherCAT-based Motion Control System
- Servo Drive 32 axes, Remote 32 I/Os
-CAM control 100~32,768 points (Up to 32 CAM Profiles)
-Supports G-code/M-code/NC commands
-Cycle Times 0.5/1/2/4ms
(same as primary task's cycle time)

SD Card Slot -Max. 8GB
Ethernet: Auto/ 10Mbps/ 100Mbps

- USB2.0, 1 channel
- Loader Service (XG5000)
- XGT Protocol (LS protocol), Modbus TCP
- FTP Server : Able to Read/Write SD Memory Files from Other Devices
- SNTP Client : Real-time Synchronization with Server

AC100V~AC240V / 50~60Hz

Mere (DxVxG): 188 x 101 x 82.4 mm
Teža: 0.79 kg
Dokumenti so pripravljeni za prenos
 - XMC_E32A_Catalogue.pdf
 - User Manual_XMC-E32A